Seiko SLP 420, Часто задаваемые вопросы

Страница: 4 / 22

easily be removed. Also by disengaging the lever, the LED on the front will flash until the
lever is back in place. Return the lever to the original position and reattach the front panel.
Reload your labels.
Q: How can I print a test label on my 410/420/430?
A:
The SLP printers are designed to print two different types of test designs. The first consists of
a two box pattern which demonstrates the density level. The second is a Seiko label that
contains a graphic. Below are the instructions for printing both:
To print a two box pattern:
Turn the machine off by pressing the "I" button. Before you turn the machine
on, Press and hold the "^" button while pressing and holding the "I" button.
To print the SII logo test label:
Turn the machine off by pressing the "I" button. Hold down the "^" button while
you press and release the "I" button.
Q: How do I print a test label on my SLP 440/450 printer?
A:
Follow the following steps to prints:
1. Press the "I" key until the SLP printer turns off and no LED's are illuminated
2. Press and Hold the "^" key until the LED begins to flash green. Do not release
3. While pressing and holding the ^ key, press the "I" key 1x to print the SII graphic Logo
4. While pressing and holding the ^ key, Press the "I" key 2x to print the SII sample
address label
5. While pressing and holding the ^ key, Press the "I" key 3x to print the density test.
6. While pressing and holding the ^ key, Press the "I" key 4x to print the serial number
and firmware.
Q: My LED is flashing, what does this mean?
A:
The LED is programmed to flash for the following reasons:
Types of Error LED Blink Pattern
Paper Out Green 1
Head Up Green 2
Paper Jam Orange 1
Buffer Overflow Orange 2
Head Temperature Red 1
Voltage Error Red 2
Motor Temperature Red 4
Q: Is there a way to tell what version of firmware is on my SLP printer?
A:
When you print a Seiko test label, the firmware version is listed on the label. To print a test
label follow the below instructions:
For the SLP-100, 240, 420, 430 printers.

Turn the machine off by pressing the "I" button. Hold down the "^" button while
you press and
release the "I" button. A test label should be printed with the
firmware version listed.

For the SLP-440 & 450
1. Press the "I" key until the SLP printer turns off and no LED's are illuminated.
2. Press and Hold the "^" key until the LED begins to flash green. Do not release.
3. While pressing and holding the ^ key, Press the "I" key 4 times to print the serial
number and firmware.