3-26
Item
Description (" ": Initial Value)
Module Height
Selects the module height. (Unit: dot).
* 1
·2 to 127 ( 10 )
Error Correction
Level
Selects the error correction level.
When [System] is "QR Code Model-2":
·L
·M
·Q
·H
When [System] is "PDF417":
·0 to 8
Hex Input
Selects [Enabled] if data is entered by hexadecimal code.
* 2
•
Enabled
•
Disabled
Rotate
Selects the print direction and angle of the 2D-barcode.
·None
·90 degrees to right
·180 degrees
·90 degrees to left
Test Print
Sets parameters about the test print.
Position
Selects the alignment of the 2D-barcode.
·Left
·Center
·Right
Info
Selects whether or not to include the setting content in the test
print.
·ON
·OFF
Test
Data
Enters the data for test print.
Up to 64 characters of one-byte and two-byte are available.
Prints the 2D-barcode with the entered settings and data.
* 2
*1:
Displayed only when "PDF417" is selected in [System].
*2:
Input formats for barcode data are as follows.
Input Example: barcode data (012345)
When [Disabled] is selected: 012345
When [Enabled] is selected: 303132333435
*3:
Not available when the [Test Data] is blank.
