－
5
－
Handling precautions
Never perform the following actions.
They can result in malfunction of the NS-2250 or USB memory or corrupt the
contents of the USB memory.
While the STATUS 4 light is on, do not remove the USB memory. If the USB
memory is removed during operation, the operation of the NS-2250 is not
guaranteed.
While the NS-2250 is running normally, do not cut the power of the NS-2250 by
switching off the power switch or pulling out the power cable, or press the
RESET switch.
Before you switch off the power, carry out the “shutdown” command to exit the
system software. Next, either confirm that the “MON>” prompt is displayed on
the console or wait for the STATUS 2 light on the front of the NS-2250 to
switch on. Finally, switch off the power.
Do not touch the connector of the USB memory with your hand or metal
directly.
To press the RESET switch, use an item with a narrow tip, such as the tip of a
ballpoint pen. Do not use a mechanical pencil. If the lead of a mechanical pencil
breaks and falls inside this console server, a malfunction may result.
When you cut the power by switching off the POWER switch or removing the
power cable of the NS-2250, wait 10 seconds or more before supplying power by
switching on the POWER switch or inserting the power cable of the NS-2250.
If power is supplied too quickly, the NS-2250 may not reset normally.
When a redundant power is used, turn off both power.
Clean the heat vents with a vacuum cleaner or similar device about once every
two months.
If the exterior of the NS-2250 becomes soiled, soak a soft cloth in a neutral
detergent diluted with water, wring it well, and then wipe the exterior. Next, wipe
with a dry cloth.
This equipment is for indoor use and all the communication wirings are limited to
inside of the building.
End User License Agreement
PLEASE READ THIS LICENSE AGREEMENT CAREFULLY BEFORE USING THE
SOFTWARE. BY OPENING THIS PACKAGE, YOU INDICATE YOUR ACCEPTANCE OF
THE FOLLOWING TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT.
SEIKO SOLUTIONS INC. (“SSOL”) grants to you a non-exclusive license to use the software
program (the “Program”) provided by SSOL to you together with this License Agreement and
accompanying documentation including a user manual (collectively the “Software”) in the
manner described below.
1. PROPRIETARY RIGHTS
Title to and all intellectual property rights in the Program are vested in SSOL or a licensor to
