Seiko LTPD247A Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 78

Seiko LTPD247A Скачать руководство пользователя страница 3

iii

PREFACE

This technical reference describes the specifications and basic operating procedures for the LTPD247A/B and
LTPD347A/B thermal printer mechanism (hereinafter referred to as “printer”).

The LTPD247A/B and LTPD347A/B have the following model.

•

LTPD247A-432-E

•

LTPD247B-432-E

•

LTPD347A-576-E

•

LTPD347B-576-E

This technical reference usually describes information common to any printer unless otherwise specified. If the
information is different depending on models, specific model names are mentioned clearly.

Chapter 1 “Precautions” describes safety, design, and handling precautions. Read it thoroughly before
designing so that you are able to use the product properly.

SII has not investigated the intellectual property rights of the sample circuits included in this technical reference.
Fully investigate the intellectual property rights of these circuits before using.    In particular, SII reserves the
industrial property rights for the heat storage simulation described in Chapter 3.    Using it for the other printers
is infringement on the industrial property rights.

The printer complies with EU RoHS Directive (2002/95/EC)

The printer contains “Pb”, the details are described below.

•

Printer mechanism

：

a particular free-cutting steel parts, a particular component in glass of the

electronic

parts

＊

Lead-containing items listed above are exempt from RoHS (2002/95/EC).

«
1
2
3
4
5
...
»

Содержание LTPD247A















































































Отзывы:

Нет отзывов