manualshive.com logo in svg

Seiko I Infotech LP-1020, Руководство пользователя


Поделиться
Скачать
background image

5-33

▼

Setting parameter items

Chapter 5  "SETUP" Menu

■

LINE DISPOSAL

Allows for setting of the end shape of fine small lines and their joining

method.

<Parameter (choice input method)>

     : Default value

OFF :

Line end shapes other than round one are treated.

ON :

All ends of fine small lines are treated as round shape.

 • With this device, lines less than 1mm (0.039 inches) in width and

length are handled as micro-length lines.

 • Fine small lines may not be clearly plotted in combinations other than

CORNER = "ROUND" and JOINT = "ROUND".

By setting the parameter to "ON", the lines are handled as CORNER

= "ROUND" and JOINT = "ROUND" allowing clear plotting.

Downloaded From ManualsPrinter.com Manuals

Содержание LP-1020



































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для LP-1020

Бренды по названию

Популярные бренды

Загрузить еще бренды