manualshive.com logo in svg

Seiko I Infotech LP-1020, Руководство пользователя


Поделиться
Скачать
background image

5-2

Setting parameter items

The following print parameters can be set.

Setting PDL parameters and device parameters can be set.

• PARAMETER MODE (DSCAN only)

• MEDIA SERIES (8HP-GL, TIFF, CALS only)

• AUTO SUPPLY

• FIXSIZE MODE

• COPY COUNT

• SUPPLY PARAM.

• DRAWING PARAM.

• SCALING PARAM.

• FORMAT PARAM.(HP-GL, DSCAN only)

• PEN PARAMETER (HP-GL, DSCAN only)

• RASTER PARAM.

Though the setup menu can be referred to or changed during the printing

process, the changed parameters are effective from the next job.

The changed parameters are automatically saved after the completion of

the setup operation, but the parameters that were only referred to are not

saved.

Setting parameters in the setup menu are tabulated below and each

parameter is explained.  Most of setting parameters as well as those of

PDL are common.  Parameters which are not displayed by PDL or those

of different display are defined each time.

e.g. DSCAN only, etc.

S E T

U P

# P O R T 1 _ H P G L

Downloaded From ManualsPrinter.com Manuals

Содержание LP-1020



































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для LP-1020

Бренды по названию

Популярные бренды

Загрузить еще бренды