Sega Luigi's Mansion Arcade Скачать руководство пользователя страница 97

Страница: 97 / 214

CONTROL

UNIT

To reassemble the controller, follow the directions in reverse order, attaching the c

ontroller cable first, and

then the remaining parts.

Perform the following operation before attaching the plate at the base of the controller cable to the cabinet.

One of the maintenance workers must make a 20 cm diameter ring with the controller cable. Lightly pull the

centre harness cable and hold in this position.

With the cable in position from step 6, the other maintenance worker must strongly tie the harness at the centre

base with the cable tie.

NOTE: From this point on, the maintenance must be performed with two workers to ensure a secure installation.

NOTE: Be careful that the harness base does not slide out of position. Tighten so that the harness is properly caught.

• The following maintenance procedure is necessary to prevent players from

being injured in the event that the protective metal tubing encasing the

controller cable at the base of the controller is damaged in any way. This

procedure must be performed.

Содержание Luigi's Mansion Arcade























































































































































































































Результаты поиска

Содержание Luigi's Mansion Arcade

Отзывы:

Бренды по названию

Популярные бренды

Sega Luigi's Mansion Arcade, Руководство по эксплуатации для владельца

Результаты поиска

Содержание Luigi's Mansion Arcade

Отзывы:

Бренды по названию

Популярные бренды