Sega Luigi's Mansion Arcade, Руководство по эксплуатации для владельца

Страница: 55 / 214

ASSEMBL
Y AND
INST
ALLA
TION
41
6
6-9 CONFIRMATION OF ASSEMBLY
1
Turn ON the power switch.
2
The Coin Lamp and the Billboard will illuminate.
3
The software will load and a logo will appear on screen,
4
The attract mode will begin showing the Luigi’s Mansion appears on screen.
5
Audio can be heard from both left and right speakers, rear and woofer speakers.
6
Press the TEST button to enter the GAME TEST MENU screen. (See Chapter 9)
7
MONITOR TEST screen
Select “MONITOR TEST” in SYSTEM TEST MODE to bring up the MONITOR TEST screen.
The monitor is shipped from the factory pre-adjusted but you may use the MONITOR TEST screen to
determine whether it need to be re-adjusted. If adjustment is needed, refer to the section of this manual
under the section MONITOR LCD.
8
Exit MONITOR TEST and select INPUT TEST
9
INPUT TEST screen
Select “INPUT TEST” in the GAME TEST MODE to bring up the INPUT TEST screen, allowing you to
test the input devices to verify operation.
10
Press TEST and SERVICE together to exit and return to the GAME TEST MENU. Select OUTPUT TEST.
11
OUTPUT TEST screen
Select “OUTPUT TEST” in the GAME TEST MENU to bring up the OUTPUT TEST screen, allowing you
to test devices such as lamps and LED’s
Use the TEST MODE to check whether or not the product has been correctly assembled and whether or not
everything operates normally.
• Please refer to the TEST procedures in Section 9 of this manual.
• If for any reason certain sections of the machine fail to start or certain aspects
of the machine do not appear normal. Remove power immediately and
investigate.
• Always refer to this manual when fault finding.
• If problems persist please contact your distributor or local SEGA office.