Sega Initial D4, Руководство пользователя

Страница: 23 / 98

16
ASSEMBLY AND INSTALLATION
6
6-3 INSTALLATION SETTINGS
When installing 2 or more cabinets, carry out the settings for cabinet seat number and in-store
competition during the game test mode. By setting different numbers but identical alphabet set-
tings you can have competitions between cabinets. You cannot have competitions between
cabinets with different alphabetic settings.
Set, adjust, and con fi rm the following settings in test mode. Refer to the LINDBERG service manual for information on system test mode, and the
Initial D4 service manual for information on game test mode.
In system test mode, set COIN ASSIGNMENTS as follows.
COIN ASSIGNMENTS
- COIN CHUTE TYPE: COMMON
- SERVICE TYPE:
COMMON
● Check whether or not the speakers are functioning correctly using SPEAKER TEST in system test mode. The speakers on this product are in
the following con fi guration. Set RIGHT SPEAKER and LEFT SPEAKER to “ON” and check that they output sound.
SPEAKER SETTING
RIGHT SPEAKER USED
LEFT SPEAKER USED
REAR RIGHT SPEAKER UNUSED
REAR LEFT SPEAKER UNUSED
CENTER SPEAKER UNUSED
WOOFER SPEAKER UNUSED
● Check whether or not the speakers are connected and functioning correctly using INPUT TEST in the game test mode.
● Check whether or not the speakers are connected and functioning correctly using OUTPUT TEST in the game test mode.
● Adjust STEEERING, GAS, and BRAKE in INPUT ASSIGNMENTS in game test mode.
● Seat numbers are assigned using SEAT NUMBER in the GAME ASSIGNMENTS section of game test mode. You can have the in-store com-
petitions by connecting cabinets together and assigning them different seat numbers. The seat numbers are “SINGLE”, “1”, and “2”.
To conduct in-store competitions, set one cabinet to “1” and the other one to “2”. Set this fi eld to “SINGLE” when installing only one cabinet,
or if you do not want to conduct in-store competitions.
● Carry out a card check in IC CARD R/W & PRINTER TEST in game test mode, and check that the card read/write function is performing cor-
rectly. The check will print a test card, and you can also use ERASE PRINT in the same test mode to erase the printed characters. Although in
some cases the printed characters may not be completely erased, this will not harm IC card’s functionality.
● Check that the network is functioning correctly in NETWORK TEST in games test mode.
● Adjust the following settings to suit the operating environment.
- Volume adjustment
- Store closing time
- Time
setting
Contact the point of purchase for this product if you are unable to adjust the volume using the procedures described in this document.