Sega Club Kart Prize, Руководство по обслуживанию

Страница: 17 / 89

16
3.5. MOVING THE MACHINE
•
When moving the machine, be sure to remove the plug from the power
supply. Moving the machine with the plug inserted can cause the power cord
to be damaged, resulting in a fire or electric shock.
•
When moving the machine, retract the leg adjusters fully. During movement
pay careful attention so that the casters or leg adjusters do not damage any
other cabling laid on the floor. Such damage could result in a fire or electric
shock.
•
Do not push the upper part of the cabinet. Failure to observe this can cause
the cabinet to fall forwards and result in accidents.
•
When transporting the machine, be sure to hold the handles on the rear of
the cabinet. Inclining the machine by holding portions other than the handles
can damage the cabinet and/or the floor surface.
•
Do not push the pop panel. Failure to observe this may damage the
installation portions and may cause unexpected accidents.
•
The machine weighs approximately 100Kg and should only be moved by a
minimum of 2 people.
To move the machine:
1. Using the handles at the back of the cabinet, tilt the cabinet back until it is balanced safely on the
rear castors. EXTREME CARE SHOULD BE TAKEN DURING THIS OPERATION TO AVOID
INJURY OR DAMAGE TO THE MACHINE.
2. Carefully roll the machine to the desired position.
3. Tilt cabinet forward until front legs are in contact with the ground – CAUTION, THE MACHINE
MAY PULL FORWARDS.
4. Adjust the leg adjusters to ensure cabinet is square and steady if required.