Seg One AH113, Инструкция по эксплуатации

Страница: 33 / 78

2. Touch the STOP/MENU (only in iPod) touch plate return to the iPhone/iPod menu.
a. To select the current menu as belows :
Music > Extras > Photo Import (without this function display on the iPod Mini) > Settings >
Shuffle Songs > Backlight > Now Playing will shows on the iPod Player display.
b. Press the SKIP/TUNE SEARCH (UP or DOWN) button on the unit (or remote control) to search
the current menu.
3. Touch the PLAY/PAUSE/ENTER (only in iPod) touch plate enter to the desired menu folder.
a. Touch the SKIP/TUNE SEARCH (UP or DOWN) touch plate on the unit (or remote control) to
search the current content in the each desired menu folder.
b. If you want return to the iPod menu, touch the STOP/MENU (only in iPod) touch plate again.
4. To resume playback, touch the iPod/MEM/C-ADJ. once again, the unit will return to iPod mode.
Charging the iPhone/iPod Player battery through the main unit:
1. iPhone/iPod Player has a internal nonremovable battery, the battery may need to be charged that
is not used for a while.
2. You can charge the iPhone/iPod Player through the main unit automatically under the STANDBY or
POWER ON mode.
Note : 1. The iPhone/iPod Player battery is 80-percent charged in about an hour, and fully charged in
about a few hours. If you charge it while playing music, it may take longer.
2. It is not better to charge under the TUNER mode. It may interfere the reception.
Note:
1. In any time, you can control the iPhone/iPod player on the main unit, remote control or iPhone/iPod
player itself while the unit in the "iPod" or "iPod MENU" mode.
2. In any time, the iPhone/iPod player must be fixed well under in the STANDBY mode to avoid the
unit and iPhone/iPod player were damaged.
3. If doesn’t support the accessory or relevant information occur in the display window of iPhone,
switch the iPhone off and turn it again.
AUX IN PLAY
The AUX input is located at the right side of the unit. Use a 3.5mm stereo jack cable to connect audio
equipment through the LINE IN jack.
1. To select the AUX input function, repeatedly touch the FUNCTION touch plate on the unit (or
remote control) until the AUX is indicated on the display.
2. Touch the VOLUME (+ or -) touch plate on the unit (or remote control) to adjust the sound output
level.
Note: LINE in cable not included.
TO SET SLEEP FUNCTION(on the remote control)
1. If you want to fall asleep to music, press the SLEEP button.
2. You may select the TUNER, CD/MP3, USB, CARD, iPod or AUX mode in sleep function to play
from 90, 80, 70 up to10 minutes of music before shutting itself off automatically.
EQ CONTROL(on the remote control)
EQ shows the present sound tone.
When you press the EQ button, the sound tone changes as below:
UK-13