Seg One AH113, Инструкция по эксплуатации

Страница: 30 / 78

3. To change Track NO., touch the SKIP/TUNE SEARCH(UP or DOWN) touch plate once. And press
long is fast forward function or rewind function.
4. To resume playback, touch the PLAY/PAUSE/ENTER touch plate once more again.
5. To change the ALBUM NO., press the PRESET/FOLDER UP or PRESET/FOLDER DN button
once.
6. To stop playback, touch the STOP/MENU touch plate once on the unit (or remote control).
Note: If the main unit is not working properly, disconnect the power source and then reconnect it again.
ID3 OPERATION
During in the MP3/WMA mode
1. Touch the ID3/FM MO./ST. touch plate once to open the ID3 function.
2. If the MP3/WMA file is write in “ID3” it will automatically to search the information of “TITLE
NAME”,“ARTIST
NAME”and “ALBUM NAME” indicated on the display.
3. Touch the ID3/FM MO./ST. touch plate again. Then the unit will resume to play normally.
USB/SD CARD OPERATION
During in the STANDBY mode
1. Insert the USB DEVICE or SD CARD, and then press the STANDBY/ON button on the main unit(or
remote control) to power “ON" the unit.
2. Touch the FUNCTION touch plate on the main unit (or remote control) to select the USB or CARD
mode. The main unit will thematically read the total number of the folders and tracks at the same
time. Then playback starts with the first track. The display shows the current track number and its
elapsed time.
3. If the USB memory device more than one folder.
a. Press the PRESET/FOLDER (UP or DOWN) button to select each folder.
b. Touch the SKIP/TUNE SEARCH(UP or DOWN) touch plate to select current track in desired
folder.
4. If the MP3 and WMA are written in "ID3".
a. During the unit in the MP3 or WMA playing. Press the ID3/FM MO./ST. button once. The display
will show a "ID3 ON", and then it will automatically to search more than 64 letters of "TITLE
NAME", "ARTIST NAME" or " ALBUM NAME" which move from the right corner to the left
corner on the display continuously.
b. Press the ID3/FM MO./ST. button once again. The display will show a "ID3 OFF", and then the
main unit will play normally.
Note: 1. The main unit can play MP3 and WMA only in this mode.
2. This unit can support most of USB devices and SD/SDHC cards (up-to 32GB memory
capacity for SDHC). It cannot access (or, need longer time to access) those devices with big
memory capacity.
3. It can support USB version 1.1 and 2.0.
4. The main unit does not support the WMA file which is protected “DRM FILE”.
Playing The Entire flash disc
1. Playback will start by touching the PLAY/PAUSE/ENTER touch plate on the unit or press the
PLAY/PAUSE/ENTER button on the remote control .
2. To interrupt playback, touch the PLAY/PAUSE/ENTER touch plate on the unit or
press the PLAY/PAUSE/ENTER button on the remote control. The time elapsed indicator will flash.
3. To resume playback, touch the PLAY/PAUSE/ENTER touch plate on the unit or press the
PLAY/PAUSE/ENTER button on the remote control again.
4. To stop playback, touch the STOP/MENU button.
Note : In any time, the USB DEVICE or SD CARD must be fixed well under in the STANDBY mode to
avoid the main unit and USB DEVICE or SD CARD were damaged.
UK-10