SEFRAM SFX+NETWORK, Техническое уведомление

Страница: 79 / 108

Technical Data Sheet FI 72.0239.0320E
Page 79 / 108
DURING X CYCLES
Manual operating mode is used to perform X cycles independently to operating orders. Once the X cycles
are complete, the SFX+ returns to normal operating conditions.
If the arrow is placed on DURING X CYCLES and if the

button is pressed, the following display
appears:
- Adjust the number of cycles to be performed using the
buttons.
- When the

button is pressed:
- The SFX+ completes the cycle in progress and performs X dust removal cycles
- the MANU LED on the front panel illuminates
- The display switches to cycle visu mode with the status of the X cycles counter in the manual box.
The SFX+ stops the manual dust removal cycles automatically when the X cycles counter reaches 000.
The manual LED on the front panel extinguishes and the display returns to cycle visu.
If, however, the manual dust removal cycles have to be stopped before the X cycles counter reaches 000,
simply press the manual button. Then:
- The SFX+ completes the cycle in progress if "stop at end of cycle" mode is selected and returns
to normal operation.
- The MANU LED on the front panel extinguishes
- For 2 - 3 seconds, the display shows the following message then switches to cycle visu mode.
The SFX+ then returns to normal operating conditions.