– 7859 –
p.
67
15.2 Satellite band
15.2.1
Power ON
Setting the remote power supply to satellite:
Configuration lines:
See chapter
Man-machine interface
for any change.
-DCSS:
Digital Channel Stacking (2
modes SATCR and SCD2 single
cable distribution)
-
LO1 and LO2 Frequency:
LO frequencies low and high
band of LNB
-
LO selection:
band commutation
on the LNB (22 kHz, Tone Burst or
DiSEqC)
- Selection polar:
polarization
commutation on the LNB (13/18V
or DiSEqC)
- Switch:
switch type and position
(No, Tone Burst, 22 kHz, DiSEqC,
Pos A, B, C or D)
-Uncommitted:
"Uncommitted" switch type
and position (No, DiSEqC, Pos 1 to 16)
-Positioner:
presence of a positioner
(Yes / No)
ON
to turn on the
remote power sup-
ply under satellite
measure
OFF
to turn off the re-
mote power supply un-
der satellite measure
AUTO
to launch au-
tomatically the re-
mote power supply in
satellite measure
mode even after
shutting off
