– 7859 –
p.
44
9.1
Updating satellites
You can update frequencies of the checks sat by consulting the file PDF posted on-line on the site web of
SEFRAM. .
http://www.sefram.com/telechargement/fichier-de-configuration.html
You have to modify frequencies, following the previous paragraph and using the file updated monthly on the
web site of SEFRAM.
We advise you to check and to update your frequencies every three months. We advise you to check and to
update your frequencies every three months
9.2
Check Sat function
Procedure:
1/ Connect the satellite dish to the appliance and start it up.
2/ Validate the remote power supply:
-
VDC lights up.
-
Check the power supply current of the LNB (IDC at the top right corner of the screen should be
between 50 and 200mA).
See chapter
Remote power supply / LNB
– DiSEqC
3/ On the Home page, go to the Check Sat mode.
Select the satellite to aim at in the list (example ASTRA1)
4/ Slowly orientate the satellite dish until hearing the locking melody and getting the best quality.
5/ Slightly turn the LNB to get the best quality (counter-polarization).
You will hear a melody as soon as a first transponder is detected; then, you will hear beeps. These beeps
are closer and closer as the quality increases.
