11
Measuring Resistance
CAUTION
To avoid possible damage to the meter or to the equipment
under test, disconnect circuit power and discharge all
high voltage capacitors before measuring resistance.
The ranges of measuring resistance are 400Ω, 4kΩ, 40kΩ,
400kΩ, 4MΩ, and 40MΩ.
The test leads may be add 0.1Ω to 0.2Ω of error to resistance
measurements. To test the leads, touch the probe tips
together and read the resistance of the leads. For best
accuracy, you can use the relative (Δ) mode to automatically
subtract this value.
High-resistance (>10MΩ) readings are susceptible to electrical
noise. To smooth out most noisy readings, enter the MAX/MIN
recording mode; then step to the average (AVG) reading.
Содержание 7352B
Страница 30: ......