SEFRAM 7352B, Руководство пользователя

Страница: 48 / 60

18
Memory Save / Load
When measuring, you can save the reading to memory and
load it from memory. The meter can store maximum
1000 data
in memory. The recorded data amount shows on the
secondary display.
To use memory save / load mode, move the blink cursor of
menu to MEM position, and press the ENTER button to enter
mode. In this mode, you can operate the below options:
Memory Options
A-SAVE
You can operate the Auto-Save mode to automati-
cally save new reading. When you use the probes
to measure a new reading, the meter will automati-
cally save it. In some case, the Auto-Save mode will
not work. For example, the reading is smaller than
the limit (refer Auto-Hold), or the reading is OL.
Press ENTER button to start Auto-Save mode,
press CANCEL button to exit.
SAVE
Press ENTER button to save a new reading to
memory.
LOAD
You can press the ENTER button to review data
from memory. Press UP or DOWN button to select
data. Press the CANCEL button to return.
CLR Press ENTER button to clear all data from memory.
MAX
Press ENTER button to review the maximum data
from memory.
MIN
Press ENTER button to review the minimum data
from memory.
To exit memory save / load mode, press the CANCEL button.