-in the decorated board below back windshield;
Notice: if the windshield is pasted with metal thermal-protective coating or
heating coating, It may affect the receiving signal. In this case, please change
the installation place.
4.3 Device outlet specification
Line No. Specification
Color
Instruction
1. 2
Keypod
Orange/ orange
Connect to SOS button
3. 4
MIC-,MIC+
Black/ Red
Connect to Microphone
5
TX
Green
Sending data (TX)/backup
6
RX
White
Receiving data (RX)/backup
7
GND
Black
Ground wire
8
MOTOR
Yellow
Connect to relay control line
9
ACC
Orange
Connect to ACC ignition
10
V-
Black(thick)
Vehicle 12V/24V negative storage battery
11
V+
Red(thick)
Vehicle 12V/24V positive storage battery
Notes of the relay wiring
The relay wiring of pump: oil connectors of both ends are a fine white line (85)
and a fine yellow line (86). The fine white line (85) is connected to vehicle
