Seetrax CIR-KIT WELD 450, Инструкция по эксплуатации

Страница: 27 / 29

27
MAINTENANCE
DAILY:
Clean Electrodes as required. NOTE: This may be as often as every 10 welds.
Ensure gap between Electrodes is clear of debris.
Replace Microscope dust cover after use.
3 MONTHLY:
Remove Electrodes and thoroughly clean them. Clean electrode holders before replacing the
electrodes.
Clean covers and worktable with a light detergent.
IMPORTANT NOTE
ISOLATE POWER TO MACHINE ELSEWHERE BEFORE CLEANING
ANNUALLY:
Lightly lubricate Foot Cable and Spring Head Mechanism. (Do not oil excessively).
IMPORTANT NOTES:
THE
CIR-KIT WELD 450 USES RECHARGEABLE POWER PACKS. IN THE EVENT
OF THE MACHINE NOT BEING USED REGULARLY, THE POWER MUST BE
SUPPLIED TO THE MACHINE AT LEAST ONCE A WEEK FOR A PERIOD OF NOT
LESS THAN FOUR HOURS. FAILURE TO DO SO WILL AFFECT THE FUNCTION OF
THE MACHINE AND YOUR SEETRAX WARRANTY.
DO NOT PLACE ANY ITEMS OF ANY WEIGHT INCLUDING PCB’S ON THE TOP OF
THE MACHINE AS THIS CAN CAUSE THE MACHINE TO BEND, AND REDUCE THE
ELECTRODE GAP TO THE GLASS WORKING AREA. (72MM) SHOULD BE THE
APPROX. DISTANCE BETWEEN GLASS AND BOTTOM OF ALLOY TRAY (ITEM 2).
THIS WILL INVALIDATE YOUR MACHINE WARRANTY