Seetrax CIR-KIT WELD 450, Инструкция по эксплуатации

Страница: 5 / 29

5
SAFETY INSTRUCTIONS
The
CIR-KIT WELD 450 is an extremely safe machine to use. However, some precautions
must be adhered to when working or repairing it:
•
Never connect the CIR-KIT WELD 450 to any voltage or frequency other than that
stated on the label at the back of the machine.
•
Never fit a higher current rated fuse than 5 amp
•
Never remove the top cover with the mains plug still connected.
•
Only a qualified electrician should carry out repair work on the circuitry, etc.
•
Use only SEETRAX replacement parts to repair the CIR-KIT WELD 450 .
•
Never put your face nearer than 6" (152mm) to the Electrodes when a weld is being
made. Splatter from tin/lead deposits, may cause burning or eye damage.
•
Do not operate with wet hands.
•
Do not leave the machine switched on when not in use other than to charge batteries.