7. INSTRUCTIONS FOR USE AND CARE OF THE HOOD
7.1 The hood has 3 ventilation speeds.
Depending on the amount of evaporation in cooking, you can choose
low, medium or high level of ventilation.
7.2 Before cooking, switch on the hood in the required operating mode. It is recommended to continue
the work of the hood for 3-5 minutes after cooking,
so that the air in the kitchen will be cleared of residual
evaporation and odors.
7.3 Switch of mode select buttons and switching on of lightning lamps is placed on the lower panel of
body (Pic. 5):
Pic. 5
1
– low speed,
2
– average speed,
3
– high speed,
0
– fan is off.
The touch switch with the symbol of the light bulb
, intended to turn on the lamp at insufficient
illumination of the working area of the cooker:
0
– light is off,
I
– light is on.
7.4. Attention!
Before cleaning the extractor hood, disconnect it from the electricity.
7.5.
Use a damp cloth soaked in warm water with a neutral detergent for external cleaning of the painted
extractor hood.
7.6. Never use abrasive detergents, coarse sponges or detergents containing soda, acid, chlorides or
solvents to clean the extractor hood.
7.7.
When cleaning, avoid getting moisture on the current-carrying parts of the extractor hood, and wipe
the surfaces with a soft cloth after washing.
7.8.
The aluminum filter, holding oil and dust from the air, is clogged and should be washed after being
soaked in hot water with an effective detergent once every 1.5 to 2 months.
Changing the color of the filter
after washing does not affect the quality of its work.
7.9.
To remove the aluminum filter, press the spring latch and remove the filter from the panel. Install the
filter in reverse order.
Do not install the filter after washing until it is completely dry.
7.10.
The carbon filters, used during recirculation mode should be changed every 3-6 months depending
on the extractor hood use. Filters are installed on the T-like
stab of the cover of the turbofan by axial
pushing and clockwise rotation.
7.11.
LED lamps
are installed on the extractor hood for lighting the working area of the cooker. Before
starting lighting lamps substitution, disconnect the extractor hood from electricity, and leave the lamps to
cool. To replace the lamp, remove the aluminum filters, push the holder of the cartridge so that the lamp