6.5
In order to secure the hood to cabinet, it is recommended to use 4 self-tapping screws 4.8x13
DIN968 (Pic. 4.2) from the middle of the hood (Pic. 4 ABCD openings)
(self-tapping screws are not
included).
Pic. 4.2
6.6
If necessary, install an air duct adapter
(Ø150 x 120mm)
on the hood adapter.
6.7
If the hood is operating in the mode of air outlet into the chimney, install the air duct of selected
diameter according to the instructions, ensuring that it is airtight.
6.8
If the hood is in recirculation mode, no air duct is required. A carbon odor filter
(should be
bought separately)
is required to install.
6.9
Check the reliability of the hood mounting, plug and connect the power cord to the socket.
For additional protection against voltage drops, it is recommended to connect the hood via an
optional 6A automation circuit breaker.
