Step 10 — Assembly Power Input Panel Overview
This animation will provide you with
an overview of what will be
assembled.
Step 11 — Assembling the Power Input Panel
When installing the power switch, ensure it's in the "off" position by setting the switch so that the
"low" point of the rocker is closest to the terminal near the edge of the switch.
The power supply cooling fan has both rotation and airflow direction marks on the side of the fan.
Make sure that the airflow direction arrow points towards the panel.
Don't forget to apply the safety warning sticker!
Step 2. REV2 Rostock Max v3 Base Assembly
Draft: 2018-07-27
Guide ID: 66 -
This document was generated on 2019-10-01 12:14:14 AM (MST).
© 2019
seemecnc.dozuki.com/
Page 9 of 12
