24
|
MAGIQ TOUCH CONTROLLER INSTALLATION MANUAL
|
25
MANAGING THE CONTROLLER
The controller will scan for one type of component at a time.
The operator can skip to the next scan once they see all
components of a particular type have been found.
CONNECTING A NEW CONTROLLER
TO AN EXISTING SYSTEM
System configuration information is stored on the Controller
memory chip and cannot be transferred from one Controller
to another. If a new Controller is connected to an existing
system it will first need to scan the system to see what is there.
Connect the Controller to the system,
ENSURE ALL COMPONENTS ARE POWERED.
Choose the ‘EXISTING SYSTEM WITH NEW CONTROL’ option.
ILL1639-A
ILL1640-A
CONNECTING A NEW CONTROLLER
TO AN EXISTING SYSTEM
cont
Once all components have been found the Controller will display a
summary list of what it has found. If this configuration is accepted,
the controller will be ready to operate the system.
MANAGING THE CONTROLLER
cont
CONNECTING A PRE-USED CONTROLLER
Important!
Any pre-used controller must be reset before
it is connected to another existing system.
Once the controller has been reset, the installation process
is the same as if it were new.
ILL1637-A
ILL1596-A
