20
|
MAGIQ TOUCH CONTROLLER INSTALLATION MANUAL
|
21
MANAGING COMPONENTS
ADDING COMPONENTS
The Controller keeps a list of all the installed components
and regularly checks that all components are responding.
To add a new component, simply connect it to the system
and power up. The Controller will detect that a new component
has been added and lead you through the set-up process.
Important!
It is important that new components of the same
type are connected
ONE AT A TIME.
ILL1633-A
MANAGING COMPONENTS
cont
Now connect and power up the new, replacement component.
The Controller will detect the new component and will give you
the option to REPLACE the faulty component or install it as a
new component. Choose REPLACE.
Important!
If you are replacing more than one faulty component,
it is important that new components of the same type are
connected
ONE AT A TIME.
ILL1635-A
REPLACING COMPONENTS
To replace a faulty component with a new one, disconnect the
old component. The Controller will display a warning message
(unless the component has previously been ignored).
Choose the ‘IGNORE’ option.
ILL1634-A
