6
|
MAGIQ TOUCH CONTROLLER INSTALLATION MANUAL
|
7
Draw the cable through the wall cavity to the hole made at the wall
bracket. Connect the cable to the wall control and mount the wall
control onto its bracket.
MOUNTING THE CONTROLLER
cont
Slide and align the wall control over the protruding bracket tabs.
Pull the wall control down so the bracket tabs engage and locate
with the keyway slots on the rear.
MOUNTING THE CONTROLLER
cont
Important!
Take care not to damage the cable or plug during this
process.
Important!
Drafts within the wall cavity can impact the temperature
reading of the wall control. We recommend that the cable access
hole be sealed, but in such a way that the cable can still retreat into
the wall cavity.
STEP 1
STEP 2
ILL1592-A
ILL1593-A
ILL1594-A
