Release Version 1.1
1
Precaution and Safety Guidelines
The content of this guideline is intended to protect user safety and prevent property damage.
Please read this user guide carefully and use the device properly
Warning
(Failure to adhere to any of the following guidelines could result in serious
injury or death for someone.)
■ Be sure to install the product after unplugging the power cord. Also, do not use many power
plugs at the same time.
- It may cause abnormal heat, fire and electric shock.
■ Do not leave the device in a place where water will fall or splash. Also, do not place anything
with water on it, such as a vase of flowers.
- It may cause malfunction or fire if liquid goes into the device.
■ Do not open the lid arbitrarily as this device has high voltage part inside. Never disassemble,
repair or modify it.
- By abnormal working, it may cause fire, electric shock and personal injury.
■ Do not install this product in places with high humidity, dust, or soot.
- It may cause electric shock and fire.
■ Always keep the location of the appliance clean during or after installation to prevent dust.
Especially when cleaning the device, wipe it with dry towel and do not use water, thinner or
organic solvent.
- It may damage the case of this device, and cause malfunction or electric shock.
■ Keep the device in a cool place where doesn’t let direct sunlight. Keep it at a proper
temperature and avoid heating appliances like candle or heater. Also, keep the equipment or
tools away from places where people come and go.
- It may cause fire.
■ Pay attention to possible hazards in the workplace, such as wet floor, ungrounded power
extension cables, old power cords and a lack of safety earth. Consult your place of purchase or
professional if problems arise.
- It may cause fire and electric shock.
■ Concerning the input voltage for operating this device, a voltage range must be within 10%
of rated voltage. Also, do not use a heat source such as a hair dryer, iron and refrigerator to the
same power unit.
- It may cause abnormal heat, fire and electric shock.
■ Disconnect the power plug with care during thunder and lightning.
■ Do not bend the power cord by excessive force. Make sure the power cord is not crushed by
heavy things.
- It may cause fire.
■ When connecting cables, install as “U” shape in order to prevent rainwater/dew/fog from
getting into the product.
