Release Version 1.1
9
7. Specifications
Model No.
SC-IPT1204P
Power
Input
DC Power
DC 48V or DC 56V Adapter
PoE Power
PoE IEEE 802.3af / 802.3at, Endspan / Midspan (Mode A / Mode B)
PoE Output CAMERA PORT
Max 30W, Standard PoE, IEEE802.3 af/at Mode A
Power Consumption
Max 1W (No-load Condition)
CAM SIDE
Transmission Distance (Max.)
In 100Mbps : 100m (CAT.5e)
In 10Mbps : 250m (CAT.5e)
RX SIDE
Transmission Distance (Max.)
500m (RG-6)
Connection
Port
NVR PORT
RJ-45 1Port (
TIA/EIA568B Type)
CAMERA PORT
1x4 RJ-45 1Port (
TIA/EIA568B Type)
EoC PORT
BNC-F 1Port , 75ohm
POWER
DC JACK 2.0pi
RJ-45 Connector
Pin Assignment(Polarity)
1Pin: TX(+), PWR(+) 2Pin: TX(-), PWR(+)
3Pin: RX(+), PWR(-) 6Pin: RX(-), PWR(-)
Bandwidth Switch
Change CAM Side Transmission Speed (100Mbps , 10Mbps)
Transmission Bandwidth
10/100Mbps (
Full duplex)
Temperature / Humidity
-10°C ~ +50°C / 0 ~ 80%
Case Material / Weight
Aluminum / 290g
Dimensions (mm)
159(W) x 92.5(H) x 34.7(D)mm
※ Using the LAN cable extension gender (coupler) causes signal attenuation. The use of multiple
gender connections is not recommended.
※ Cable transmission distance may vary depending on the specifications of camera and NVR.
※ When using the camera PoE function, the transmission distance may vary depending on the type
of camera.
