Release Version 1.0
7
※ The transmission distance may vary slightly depending on the quality of the coaxial cable used
and the quality of the connector connection.
※ Depending on the power specifications of the camera to be used, there may be a difference of
approx. 20-30% to the available power values in the table.
※ The cable transmission distance may vary depending on the camera and NVR specifications.
※ When using the PoE function of the transmitter, the transmission distance of the coaxial cable
may vary depending on the camera type.
In particular, use a dedicated adapter for power-consuming IPTZ cameras and cameras with high
IRLEDs.
5-2. Product Installation Precautions
※ Use a dedicated adapter for each product separately. Powering multiple products with one
adapter is not recommended.
※ It is not recommended when the products are in contact or connected to each other.
※ When installing the product, press the function button for 2 to 5 seconds to pair.
※ Remove the transmitter power supply during pairing
(Pairing function does not work if the transmitter power supply is connected)
※ Switch off PoE on the transmitter when using the camera power supply unit.
※ In the event of an abnormal picture or loss of connection during use, perform pairing again.
※ If the receiver is supplied with power via PoE, we do not recommend connecting the adapter to
the DC socket.
※ When installing the product using PoE power supply, it is recommended to check the video and
ground the camera.
※ When using a surge protector, the cable distance between the camera and transmitter should be
less than 50 m.
※ For 4-camera configuration, it is recommended that the distance from the receiver to each
transmitter is a maximum of 600 m (based on RG-6).
