Release Version 1.0
2
Caution
(Failure to comply with any of the following guidelines may cause
injury or property damage.)
■ The correct ambient temperature and humidity are recommended.
- Avoid extremely high temperatures (above 50 ° C) or low (below -10 ° C) and humid conditions.
■ Install the device in a well-ventilated place and avoid direct sunlight or heating devices.
■ Strong shocks or vibrations can lead to device failures. Be careful when using the device.
- Install the device in a location free from strong vibration.
■ Be sure to connect the power cord to a grounded outlet.
- Electric shock (electric shock) and personal injury can result.
■ When this unit is used near equipment that generates strong radio waves, such as a
television set, radios (TRANCEIVER, walkie-talkie, etc.), repeaters, etc., it may affect the video
signal and abnormality such as noise or cracks may appear in the picture. Do not use it as it
may cause the device to malfunction.
■ The transmission distance may differ depending on the type of coaxial cable and UTP cable.
■ During thunderstorms or lightning, ensure your safety and pull out the power plug.
■ To prevent water droplets such as rainwater / dew / fog from entering the inside of the
device via the cable, lay the cable in a U-shape when connecting.
■ If you notice unusual noises or smells, pull out the power plug immediately and contact the
dealer or the service centre.
- There is a risk of fire and electric shock.
■ If you have any problems or questions other than those listed above, see the
troubleshooting guide at the end. If you need help from a professional technician, contact our
A/S centre.
■ When extending or terminating a coaxial cable, be sure to connect it as follows.
- BNC-M (male) - BNC-JJ - BNC-M (male): Connection example BNC connector (used for HD-SDI)
■ Insulate the part where the cable connects to the connector so that the metal part is not
exposed.
■ The UTP cable (Unshielded Twisted Pair) is only intended for indoor use. Use shielded twisted
pair (STP) cable for outdoor use.
- Use standard CAT.5e or higher UTP cables.
■ Since this product has a PoC function, the connected device may malfunction if it is
connected to other devices. Therefore, read the instruction manual carefully before use.
■ Class A equipment (commercial broadcast and communication equipment)
- This device is an electromagnetic wave device (Class A). It is recommended that the seller or user take
this
into account and the device is not intended for household use
■ Be careful not to change the network cabling.
