32
16A4A4-00003E-2
6.1 Display
No
Symptoms
Cause/Measures
1
・
No display (LED will not light)
・
Make sure the power cord is inserted securely.
・
Press the dial switch and turn ON the power of the TM.
2
・
No display (LED lights red)
・
Check that the image signal cable is inserted properly.
・
Make sure the power of the computer is on.
・
Check if the image output of the computer is properly output.
3
・
Display is dark
・
Adjust the Brightness.
Refer to
“
3.2.3 Adjusting Brightness
”
.
4
・
Display is misaligned (when
input with analog RGB)
・
Try the Auto Adjustment.
Refer to “
3.2.2 Adjusting Display Screen
”.
・
Adjust
“H Position”/”V Position” by OSD [Menu] > [Display].
5
・
Vertical lines (bars) appear on
the screen
・
Part of screen is flickering.
・
Try the Auto Adjustment.
Refer to “
3.2.2 Adjusting Display Screen
”.
・
Adjust
“Pixel Clock” by OSD [Menu] > [Display].
6
・
Entire screen is flickering
・
Right/Left of screen is not
displayed
・
Try the Auto Adjustment.
Refer to “
3.2.2 Adjusting Display Screen
”.
・
Adjust
“Phase” by OSD [Menu] > [Display].
7
・
Afterimages appear
・
Afterimages can be seen if the same image is displayed for a
long time. Use the screen saver or the OFF timer function to
avoid image burn-ins.
8
・
Red, green, blue, and white
dots can be seen on the screen.
・
There is a defective dot on the
screen.
・
This is a characteristic of the LCD and not a failure.
