26
16A4A4-00003E-2
4.4 Calibration
4.4.1
Save Location Setting of Calibration Data
Calibration data of the touch screen can be either
“stored in the TM” or “stored in the computer”.
The initial setting will be
“store in the TM”.
Follow below procedure to set the save location of the calibration data.
1)
Select [Start] > [All Program] > [DMC] > [DMC Touch Panel Configuration] and open the
“Properties” window.
2)
Click [Device] and open the device screen.
3)
Place a check in the box of [Use EEPROM] to enable EEPROM and save the calibration
data in the TM unit.
