Security Tronix ST-DVR8708BG, Руководство пользователя

Страница: 9 / 91

v2.0 11/8/11 9
HDD Storage Calculator
Selecting the appropriate size hard disk drive is dependent upon a number of variables including:
 Recording Mode: D1, HD1, CIF, QCIF
 Recording Quality
 Number of Cameras
 Frames per Second
 Hours per Day to Record
Securitytronix provides a DVR Hard Disk Drive Storage Calculator to help determine the number
of days of recording are possible based upon HDD capacity. To access the calculator go to the
following link:
http://www.securitytronix.com/support.asp
6. ALARM CONNECTIONS
a. The DVR provides 4 alarm inputs and 1 alarm output port similar to the diagram below.
1 2 3 4
1 Alarm Inputs NO or NC
2 GG 2 Ground Connections
3 COM NO G G COM, Normally Open and Grounds
4 12V Not used in this mode
b. The alarm input has no restriction (i.e., normal can be either open or close).
c. The alarm input is a grounding alarm input. The grounding of the power supply and the
alarm sensor must be shared when using an external power supply.
d. The GND alarm detector is connected to the alarm sensor’s COM via a parallel
connection.
e. If the alarm is connected to two DVRs or connected with the DVR and other equipment it
should be isolated by a relay.
f. Regarding the alarm output, use an external power supply when using external alarm
equipment.
g. The alarm output cannot be connected with loads greater than 1A to prevent damage to
the relay. A contact isolator is required if a loads greater than 1A are used. Alarm output
relay specifications: