Security Tronix ST-DVR8708BG, Руководство пользователя

Страница: 25 / 91

v2.0 11/8/11 25
e. ALARM OUTPUT – If an external signal (e.g., bell) to be activated upon a video loss
event highlight the checkbox.
f. DELAY – Period during which the alarm sounds after the alarm input returns to standby
status. Set a delay in the range of 10 to 300 seconds.
g. RECORDING CHANNEL – Select one or multiple recording channels for the video signal
when the alarm is activated.
h. TOUR – Upon a video loss or other alarm event the monitor will display a single window
beginning with the channel on which the alarm took place. If desired, additional single
windows per channel will sequence. The sequence interval is set by going to
Main Menu ,
clicking on the System icon, clicking on the Tou r icon and entering the interval period in
seconds.
i. PTZ ACTIVATION – In the event of a video loss or other alarm a PTZ camera can be
activated and set to automatically pan and or cruise among pre-determined spots. By
clicking on SET a PTZ Activation screen appears.
For each PTZ camera select the type of PTZ function desired from the drop-down menu.
When done, click
OK . Note for PTZ activation to work, the PTZ camera has to be
configured by going to Main Menu , clicking the System icon, and clicking the PTZ Config
icon and entering the settings. Once done, the PTZ’s presets, pattern or cruise settings
must be created. This is done by calling up the
PTZ Control through the Short-cut Menu .
j. DELAY - Once the alarm stops the recording will continue for a set period of 10 to 300
seconds then stop.
k. SHOW MESSAGE – If the checkbox is highlighted an Alarm Status screen will appear on
the monitor when a video loss event occurs.
l. BUZZER – If the checkbox is highlighted a beep will be heard when a video loss event
occurs.
m. SEND EMAIL – If the checkbox is highlighted an email will be automatically sent to a
designated individual when a video loss event occurs. Go to Main Menu , click the
System icon and then click the NetService icon to enter the desired email setting.
n. After all selections are made click OK .
Auto Recording – Alarm Recording
The first step to setting up alarm recording is to configure the DVR’s Alarm Output .
a. From Main Menu click the Alarm icon followed by the Alarm Output icon. Alternatively,
click the right mouse button to display the Short-cut Menu and select Alarm Output .
An Alarm Output screen similar to the one below will be displayed.