Security Labs SLW-163, Руководство пользователя

Страница: 6 / 25

9. Click on Network Configuration
Network Configuration
Configure the Network parameters from this page.
Note: Check the box “Obtain IP from DHCP server” or manually enter your
address information.
• DHCP checkbox:
If checked, the camera will obtain an IP address from the
DHCP server in your router. This is an automated process and perhaps the
easiest to use. (Confirm your Router has the DHCP function enabled).
A better solution compared to using DHCP is to enter an IP address that
never changes (static). This will provide a more reliable method of connecting
with your camera via the internet in the future.
•IP address: Manually type in an IP address if you have a Static IP (one that
never changes from your Internet Service Provider). Make sure the subnet
(the first three sections of the number) are the same as the gateway you type
in.
•Mask: The default subnet mask of the camera is: 255.255.255.0
•Gateway: Make sure it is in the same subnet with your PC IP address.
Default Gateway address is 192.168.1.1
•DNS: IP address of your Internet Service Provider (ISP).
•Port: LAN port assigned for the camera, usually 81.
•User & Password: Default User = admin
Password = _________(leave space empty).
10.
After completing the Network Configuration,
Click OK
Note: You may find it necessary to place the IP address assigned to the camera
in “Trusted Sites” for Internet Explorer. See Appendix.
RESET BUTTON: Press and hold down the RESET BUTTON for 5 seconds. Release
the button and IP camera will be reset back to the factory default settings.
11. Access your camera by double clicking the IP address listed in the
camera finder window, or type the IP address of the camera directly into the
address line of your preferred web browser.
9. The Camera Login page will pop up. Enter your account and password on
the login page. By default, the administrator's username is: admin, leave the
password box blank