10
3
3. DISPLAY MODE
4. AUTO ADJUST
5. ALARM HISTORY
6. EXIT
change the setting
the change and return to the main menu.
Video/Audio inputs for a DVR/VCR
Video/Audio outputs for a DVR/VCR
UL & FCC listings, Model # label
Standby power switch
ALARM INPUT and OUTPUT TERMINAL (#6 in FIG-4)
An accessory alarm input is provided for each camera (C1, C2, C3, C4)
on the alarm terminal strip on the monitor’s back panel. These inputs
require a normally open relay as an input triggering device, such as a
PIR, door switch, sonic detector, etc. The monitor’s ALARM SENSOR
must be on for alarm inputs C1-C4 to activate. When activated, C1-C4
will cause the monitor to go to full screen for the associated camera.
Cameras provided with this unit (with built in PIR motion detection) have these
connections automatically when connected to the monitor through the DIN jacks.
ALARM OUTPUT
An alarm output has been provided to trigger an external device such as
a DVR/VCR to activate. When the monitor’s alarm sensor is on, an alarm
condition will activate the ALARM OUTPUTS. Normally open, common,
and normally closed contacts are provided.
