6
7
System operation (cont.)
System operation (cont.)
will display (FIG 11)
to
to zoom the area by 2X
to exit the zoom function
“F1234” will display on the
to freeze
number in “F1234”
will blink.
to exit the freeze
number of “F1234” will blink (FIG-13)
to exit the freeze
.
See page 12 for selecting channels and dwell time.
to return to QUAD mode.
11. AUTO VIDEO LOSS DETECTION IN ANY DISPLAY MODE
To alert the system when a camera is disconnected, destroyed, or the signal
line is interrupted, the VIDEO LOSS function can be activated under the
DISPLAY ADJUST menu (see page 11). When video is lost on any camera,
the corresponding number will flash in the “L1234” indicator at the top of the
screen. If the alarm sound is also active, it will sound at the moment the
video signal is lost (FIG-14). The default setting for this function is OFF.
DVR/VCR monitoring and playback:
to enter the DVR/VCR mode.
12.
The lower left corner of the screen will display “VCR”. The audio and
video signal from any connected recorder will be visible for playback
or live monitoring.
ZOOM and FREEZE functions are available in the VCR mode. The VCR mode
should be activated after a recorder is connected and prior to recording to ascertain
that cable connections to and from the recorder and monitor are correct. The recorder
will receive the signal displayed on the monitor for recording. The VCR mode can
be active or inactive during recording, but must be active to playback a DVR or VCR
recording. If the ALARM SENSOR is active and the monitor receives an alarm from
one or more cameras, the monitor will leave the VCR mode automatically during the
alarm and will return to the VCR mode at the end of the alarm. See page 4 for
DVR/VCR connection diagrams.
AUDIO RECORDING: In the QUAD mode, audio from channel one is automatically
selected and sent to the recorder. In full screen mode, the active camera audio is
recorded.
Audio recording is prohibited by law in some areas. Check with local, state,
and federal authorities for current laws.
DVR/VCR monitoring and playback:
top left of the screen (FIG-12).
:
