Security Labs PTZ IP Camera, Руководство пользователя

Страница: 41 / 74

”System Name”
This is to give IP Camera a name identifiable in a SNMP network.
“System Contact”
This is to give the administrator a name.
“System Location”
This is to set IP Camera location.
“Manager IP Address”
This sets the IP address where the administrator can manage IP Camera from. It is
valid for up to 8 IP addresses.
To manage y o u r IP Camera from any IP
addresses leave it as *.*.*.*.
“Community”
This is to set a Community name for NMS. The community name has to be the
same as that set in NMS.
“Permission”
This is to set the administrator’s authority. Options are Read, Read/Write, and No
Access.
“Description”
This is for an administrator to make notes.
2.4.6 Language
Use this section to set IP Camera Interface language.
i. Interface Language
At the moment, the administrator can only choose between; English, Chinese
(Traditional) and Chinese (Simplified).
ii. Email Preference
Click “Yes” to apply language interface to Email notification.
2.4.7 About
The administrator can use this section to check firmware information,
save/restore settings, upgrade firmware and see manufacturer’s details.
i. About
This section gives crucial information about t h e IP Camera’s
Firmware Version, Hardware Version and Serial Number.