Security Command XRSuper6, Руководство пользователя

Страница: 8 / 39

4 XRSuper6 Introduction
A B C D E F G H I J K L
V W X M N O P Q R S T U
Y Z
COMMAND 9 0
1 2 3 4
5 6 7 8
POWER JONES RESIDENCE
F R I 2 : 51 AM
ARMED
Lighted display
Select keys
Data Entry keys
COMMAND key
Back Arrow key
Lighted display
Select keys
AC LED
Data Entry keys
COMMAND key
Back Arrow key
1 2 3 4
5 6 7 8
9 0 COMMAND
A B C DEF GHI JKL
VWX STU PQR MNO
YZ
POWER
32-Character Keypad
16-Character Keypad
AC
LED
ARMED
LED
The Security Command Keypad
Your system may have one or more easy-to-use Security Command
keypads (16 or 32-character) that allow you to properly operate
the system. The illustrations and descriptions below highlight
some of the keypad features:
The Select keys
The four keys under the display, the Select keys, make your
system so easy to operate. They allow you to choose what to do
by pressing the Select key under choices being shown in the
display.
Data Entry keys
These keys allow you to enter your user code when arming or
disarming and enter other information into the system.
The Back Arrow key
You can press the Back Arrow key to back up through the list of
functions in the User Menu or to make a correction by erasing
the last character you entered.
The COMMAND key
The COMMAND key allows you to advance through the keypad
displays or User Menu or complete a data entry function.
AC LED
This LED remains on steady as long as your system is connected
to its AC power supply. Should there be an interruption, the LED
turns off and the system's backup battery maintains normal
operation to allow you to contact our service department.
ARMED LED
This LED is ON steady anytime burglary protection is armed and
OFF when ALL areas are disarmed.
32-Character Keypad User Options Menu
Press and hold the Back Arrow and COMMAND keys for about two
seconds. The keypad display shows
SET BRIGHTNESS . Use the
left Select key to lower the display brightness and the right
Select key to increase brightness. Press COMMAND.
At
SET TONE , use the left Select key to lower the keypad tone
and the right Select key to raise the tone. Press COMMAND.
At
SET VOLUME LEVEL , use the left Select key to lower the
keypad volume and the right Select key to raise the volume.
Press the Back Arrow key to exit the User Options menu.
Technical Manuals Online! - http://www.tech-man.com