Security Command XRSuper6, Руководство пользователя

Страница: 22 / 39

18 XRSuper6 User Menu
Changing User codes
1. Access the User Menu.
2. Press the COMMAND key until
USER CODES? displays.
3. Press any one of the Select keys. The keypad displays ADD
DEL CHG .
4. Press the Select key under CHG to change a user code. You
must have a Master user code level to change a user code.
5. At the USER NUMBER: - prompt, enter the user number to
change and press COMMAND.
6. The display changes to CODE NO:
* * * *
. Enter the new
4-digit user code and press COMMAND. If the code you
entered is already in use, or is a code used internally by the
system, the keypad displays
ALREADY IN USE . You must enter
a different 4-digit user code.
7. If you are changing a code other than your own, the keypad
next displays MASTER? NO YES . Select YES if you want this
user to have a Master authority level.
Select
NO if you want this user to have a Standard authority
level. If you select NO , refer to item number 7 in the Adding
User Codes section on the previous page.
Important : Changing a user code does not change the user
number. User number two may have their user code changed
from 1234 to 5678 but they are still user number two.
Date and Time
User Code Level : Master only.
Function: Allows you to change the current date and time
displayed on the keypad and used by the system for schedules
and Display Events.
Setting the Date and Time
1. Access the User Menu.
2. Press COMMAND until
TIME? displays. Press any Select key.
3. The keypad displays the current day and time. Press the
COMMAND key to display the current date. Press the
COMMAND key again to make any changes.
4. The keypad displays TIME DAY DATE .
5. Press the Select key under TIME to change the time. The
keypad displays – : AM PM . Enter the current time and
select AM or PM .
The display changes back to TIME DAY DATE .
6. Press the Select key under DAY to change the day of the
week. The keypad displays SUN MON TUE WED . If the current
day is not displayed, press the COMMAND key. Press the
Select key under the correct day.
7. Press the Select key under DATE to change the date. The
keypad displays:
MONTH: - Enter one or two digits for the month. Press
COMMAND.
DAY: - Enter up to two digits for the day. Press COMMAND.
YEAR: - Enter up to two digits for the year. Press COMMAND.
The display returns to TIME DAY DATE . Press the Back Arrow
key to exit the User Menu.
Technical Manuals Online! - http://www.tech-man.com