Security Command Executive XR200, Руководство пользователя

Страница: 49 / 55

45
45
The relay activates
momentarily during
which you must open
the door.
Once you open the door,
you have 30 seconds to
exit and close the door
before the zone 2 Soft-
Shunt expires.
Easy Entry™ User's Guide
This section of the user's guide provides information on using the Easy Entry™ access control capability of the security command system.
If your system is not currently using any access control devices, disregard this section. There are three different operating modes: Door Strike,
Arming and Disarming, and Entry Delay. All of the examples below assume that your system requires a user code to arm and disarm the
protection.
DOOR STRIKE
From the Status List, present your card to the reader. Once it is
validated by the system, the Door Strike relay activates. Home/Away
systems only activate the Door Strike relay when arming and disarming.
Select NO to arm or disarm
individual areas. Select YES,
or simply wait, and the
keypad will automatically
arm or disarm all areas for
which you are authorized.
ARMING AND DISARMING AN AREA SYSTEM
Press Command. The keypad displays ARM DISARM.
Press the Select key under either option. The keypad
displays ENTER CODE: -. Present your card to the
reader. Once it is validated by the system, all areas
accessible by you arm or disarm automatically.
Appendix
Appendix
The relay activates
momentarily during
which you must open
the door.
Once you open the door,
you have 30 seconds to
exit and close the door
before the zone 2 Soft-
Shunt expires.
Easy Entry™ User's Guide
This section of the user's guide provides information on using the Easy Entry™ access control capability of the security command system.
If your system is not currently using any access control devices, disregard this section. There are three different operating modes: Door Strike,
Arming and Disarming, and Entry Delay. All of the examples below assume that your system requires a user code to arm and disarm the
protection.
DOOR STRIKE
From the Status List, present your card to the reader. Once it is
validated by the system, the Door Strike relay activates. Home/Away
systems only activate the Door Strike relay when arming and disarming.
Select NO to arm or disarm
individual areas. Select YES,
or simply wait, and the
keypad will automatically
arm or disarm all areas for
which you are authorized.
ARMING AND DISARMING AN AREA SYSTEM
Press Command. The keypad displays ARM DISARM.
Press the Select key under either option. The keypad
displays ENTER CODE: -. Present your card to the
reader. Once it is validated by the system, all areas
accessible by you arm or disarm automatically.
ABC SECURITY
FRI 2: 5 1 A M
POWER
While the keypad is in
the Status List, present
your access card.
ABC SECURITY
ARM DISARM
ABC SECURITY
ENTER CODE: – ABC SECURITY
ALL? NO YES
POWER POWER POWER
ABC SECURITY
FRI 2: 5 1 A M
POWER
While the keypad is in
the Status List, present
your access card.
ABC SECURITY
ARM DISARM
ABC SECURITY
ENTER CODE: – ABC SECURITY
ALL? NO YES
POWER POWER POWER