18
18
User Menu
Zone Monitor
User Code Level: 4 and above.
Function: Allows the system to monitor selected disarmed zones
(doors, windows, or motion detectors) and display their name at the
keypad as they're faulted.
Zone Monitor works with any disarmed zone and will also sound the
keypad monitor tone when the zone faults. The zone name is
displayed at all keypads in your system.
You can place any combination of disarmed zones in Zone Monitor
but only the most recent zone faulted is displayed. The displayed
zone name clears automatically after a short time or when the zone
is armed.
Using Zone Monitor as part of your weekly system test: After
using the System Test function (see page 19), place all perimeter
and interior zones in Zone Monitor. Starting at the front door, go
around and open and then close each door and window. You should
hear the keypad beep each time. The keypad will also display the
name of each zone as its device is opened.
Once all protected doors and windows have been tested, walk in
front of each motion detector. The keypad should beep to confirm
their operation. If at any time during your weekly testing a device
does not cause the keypad to beep, call the service department for
assistance.
Using the Zone Monitor Function
1. Access the User Menu.
2. Press COMMAND until ZONE MONITOR? displays.
3. Press any SELECT key. The keypad displays ALL NBR for an
Area system (skip ahead to number 5) and PERIM ALL NBR
for an All/Perimeter or Home/Away system.
4. Select PERIM to place all disarmed perimeter zones into Zone
Monitor. PERIM is displayed only on All/Perimeter and Home/
Away systems.
4a. The keypad displays PERIM? ADD RMV.
4b. Select ADD to put all perimeter zones into Zone Monitor.
4c. Select RMV to remove all perimeter zones.
5. Select ALL to place all disarmed zones into Zone Monitor.
5a. The keypad displays ALL? ADD RMV.
5b. Select ADD to add all disarmed zones to Zone Monitor.
5c. Select RMV to remove all disarmed zones.
6. Select NBR to enter a specific zone number for zone monitor.
7. If NBR is selected, the keypad displays ZONE: - ADD RMV.
7a. Enter any zone number and select ADD to add this zone.
7b. Enter any zone number and select RMV to remove this
zone.
8. The zone number automatically disappears and a new zone
number can then be entered in step 7a or 7b.
☞
Browser Feature
If you’re unsure of the zone number or description, refer to the
Appendix at the back of this guide for a diagram showing you how
to use the built-in Zone Monitor browser.
User Menu
Zone Monitor
User Code Level: 4 and above.
Function: Allows the system to monitor selected disarmed zones
(doors, windows, or motion detectors) and display their name at the
keypad as they're faulted.
Zone Monitor works with any disarmed zone and will also sound the
keypad monitor tone when the zone faults. The zone name is
displayed at all keypads in your system.
You can place any combination of disarmed zones in Zone Monitor
but only the most recent zone faulted is displayed. The displayed
zone name clears automatically after a short time or when the zone
is armed.
Using Zone Monitor as part of your weekly system test: After
using the System Test function (see page 19), place all perimeter
and interior zones in Zone Monitor. Starting at the front door, go
around and open and then close each door and window. You should
hear the keypad beep each time. The keypad will also display the
name of each zone as its device is opened.
Once all protected doors and windows have been tested, walk in
front of each motion detector. The keypad should beep to confirm
their operation. If at any time during your weekly testing a device
does not cause the keypad to beep, call the service department for
assistance.
Using the Zone Monitor Function
1. Access the User Menu.
2. Press COMMAND until ZONE MONITOR? displays.
3. Press any SELECT key. The keypad displays ALL NBR for an
Area system (skip ahead to number 5) and PERIM ALL NBR
for an All/Perimeter or Home/Away system.
4. Select PERIM to place all disarmed perimeter zones into Zone
Monitor. PERIM is displayed only on All/Perimeter and Home/
Away systems.
4a. The keypad displays PERIM? ADD RMV.
4b. Select ADD to put all perimeter zones into Zone Monitor.
4c. Select RMV to remove all perimeter zones.
5. Select ALL to place all disarmed zones into Zone Monitor.
5a. The keypad displays ALL? ADD RMV.
5b. Select ADD to add all disarmed zones to Zone Monitor.
5c. Select RMV to remove all disarmed zones.
6. Select NBR to enter a specific zone number for zone monitor.
7. If NBR is selected, the keypad displays ZONE: - ADD RMV.
7a. Enter any zone number and select ADD to add this zone.
7b. Enter any zone number and select RMV to remove this
zone.
8. The zone number automatically disappears and a new zone
number can then be entered in step 7a or 7b.
☞
Browser Feature
If you’re unsure of the zone number or description, refer to the
Appendix at the back of this guide for a diagram showing you how
to use the built-in Zone Monitor browser.
Содержание Executive XR200
Страница 1: ...User s Guide XR200 User s Guide XR200 ...
Страница 55: ...LT 0287 11 97 LT 0287 11 97 ...