manualshive.com logo in svg

Security Command Executive XR200, Руководство пользователя

Поделиться
Скачать
Security Command Executive XR200 Скачать руководство пользователя страница 18

14

14

Alarm Silence

User Code Level:  2 and above.

Function: Silences the alarm bell or siren during an alarm.

Alarm Silence allows you to turn off the alarm bell or siren connected
to your system during an alarm. Using Alarm Silence does NOT stop
an alarm report from being sent to the central station and does not
reset any alarmed devices. Use the Sensor Reset function to reset
devices such as smoke detectors that have latched in alarm.

Note: You can also silence an alarm by entering your user code and
pressing COMMAND while the bell or siren is still sounding.

Using the Alarm Silence Function

1. Access the User Menu.

2. The keypad displays ALARM SILENCE?.

3. Press any SELECT key. The system silences the bell or siren

and exits the User Menu.

User Menu

Sensor Reset

User Code Level: 1 and 2 - During schedules only. 3 to 9 - Anytime.

Function: Resets smoke or glassbreak detectors. Also clears Fire/
Supervisory alarm and trouble displays.

Sensor Reset is used to reset smoke and glassbreak detectors after
they have been tripped. Once these detectors have tripped, they
must be reset before they can detect any additional alarm conditions.
When Sensor Reset is selected, power to the detectors is temporarily
removed by the system allowing them to reset.

Make sure all smoke is cleared from around the area of the smoke
detectors before performing a Sensor Reset to prevent the alarm
from occurring again.

Resetting the Sensors

1. Access the User Menu.

2. Press COMMAND until SENSOR RESET displays.

3. The keypad displays SENSORS OFF for five seconds followed

by  SENSORS ON.

4. The keypad automatically exits the User Menu.

Alarm Silence

User Code Level:  2 and above.

Function: Silences the alarm bell or siren during an alarm.

Alarm Silence allows you to turn off the alarm bell or siren connected
to your system during an alarm. Using Alarm Silence does NOT stop
an alarm report from being sent to the central station and does not
reset any alarmed devices. Use the Sensor Reset function to reset
devices such as smoke detectors that have latched in alarm.

Note: You can also silence an alarm by entering your user code and
pressing COMMAND while the bell or siren is still sounding.

Using the Alarm Silence Function

1. Access the User Menu.

2. The keypad displays ALARM SILENCE?.

3. Press any SELECT key. The system silences the bell or siren

and exits the User Menu.

User Menu

Sensor Reset

User Code Level: 1 and 2 - During schedules only. 3 to 9 - Anytime.

Function: Resets smoke or glassbreak detectors. Also clears Fire/
Supervisory alarm and trouble displays.

Sensor Reset is used to reset smoke and glassbreak detectors after
they have been tripped. Once these detectors have tripped, they
must be reset before they can detect any additional alarm conditions.
When Sensor Reset is selected, power to the detectors is temporarily
removed by the system allowing them to reset.

Make sure all smoke is cleared from around the area of the smoke
detectors before performing a Sensor Reset to prevent the alarm
from occurring again.

Resetting the Sensors

1. Access the User Menu.

2. Press COMMAND until SENSOR RESET displays.

3. The keypad displays SENSORS OFF for five seconds followed

by  SENSORS ON.

4. The keypad automatically exits the User Menu.

Содержание Executive XR200
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды