Security-Center TV7202, Руководство по установке

Страница: 32 / 58

If is disabled, the file is overwritten by the newest snapshot.
There are two methods for uploading snapshots. If you enable , snapshots are sent
continuously at configurable intervals over a configurable period. If FTP put snapshot with date and time suffix is
disabled, the video server can use FTP for uploading and overwriting the snapshot files. You configure the remote
folder for the snapshot files on the network page. The snapshot time period is from
to
and is repeated daily. Set the snapshot interval under .
Use to combine motion detection with the digital inputs or for sending snapshots. The
administrator can choose any combination of conditions to generate special applications according to personal
requirements. The video server monitors the channel and the digital input continuously. Snapshots taken after an
event can be configured so that they are delayed according to the setting of
following an event. The three snapshot types are VPRE.JPG,
VTRG.JPG and VPOS.JPG. The administrator can set the time delay under
to reduce multiple start procedures caused by the
same event.
Two types of are available. Four device operation options are available for the digital input.
For motion detection, window names are displayed below for selection. The configuration of motion detection is
described in the previous section. After you select the , the video server operates the device at
the digital output and/or uploads the snapshots according to the settings under . Click Reset
output to reset the original state of the alarm input/output.
32