Housing design & mounting
Mounting and Installation, Technical Description, T 811 065 en
13 / 41
2.1
Integrated B7-MIC11 indication and control map
Fig. 4 Front view of housing
The B7-MIC11 indication and control map is language-
neutral and a permanently integrated component of the
SecuriFire 500.
The connection to the main control unit is by means of
a ribbon cable.
SecuriFire 500 has the same operating concept as the
corresponding devices of the SecuriFire system family.
The SecuriFire operating instructions are applicable.
2.2
Drilling plan
All dimensions in mm.
Fig. 5 SecuriFire 500 drilling plan
•
Mount rear wall according to drill plan with 4 pcs.
5 x 40 round head screws and 4 pcs. S 8 dowels.
When mounting on plaster board, appropriate
dowels and reinforcement may be necessary.
Weight incl. batteries: 7.8 kg!
•
Place batteries and connect
•
Wire mains connection
Notice
Rating plates
Each SecuriFire 500 map case is delivered with two rating plates. One of them is already attached at the factory
on the right inside in the map case over the batteries. The second rating plate is packaged with the control unit
and has to be attached in access level 1 (outside on the map case) before commissioning where it can be easily
seen.
