T/AML2C/080
28th November 2019
5) Sharing or Adding Additional Devices
a)
To add an additional device simply repeat the procedure after
tapping the “+” icon
b)
To add a shared device you must select the “Add Shared De-
vice” and input the Serial Number or Scan the QR Code of the
device being shared. Both can be found under the Device’s
Settings and “About”.
c)
To send a share invite via whatsap, text or email, click the share
icon under the device feed and select the relevant option and
individual’s contact details. This will send the individual a link
with the serial number information that can be copied and
pasted in to the field on the add shared device screen below .
N.B:
You will also need the password the device was initially set up
with to successfully install a shared device and access the
device feed.
4) Installing the Device
Important:
The Doorbell should be positioned to prevent excessive exposure to direct sunlight as this
could negatively affect the performance of the PIR motion detection sensor.
a)
Decide on device positioning considering the above; the unit is supplied with wood screws, wall
plugs and 3M double sided backing to suit a variety of installations; therefore, select the most ap-
propriate method to fix the Backplate of the Doorbell in the desired location.
b)
Once the Backplate is mounted place the Doorbell on to it and secure the two together via the
hole in the base of the doorbell using the supplied machine screw and a Philips head screwdriver.