T/AML2C/080
28th November 2019
2) Add a device
After charging the device for 8 hours press the Bell Button to wake-up the Doorbell. The voice
Prompt “Wait to be configured” should be heard before proceeding to adding the device as
below.
N.B:
If the above voice prompt is not heard wake-up the Doorbell, using the Bell Button, then press
and hold the RESET button. Release the reset button when the voice prompt “Restore factory
settings please don’t power off” begins.
Once the device is reset to its default configuration the voice prompt “Wait to be configured”
should be heard when waking the device.
a)
Open iCSee and register for an account if you
haven't already.
a)
Tap the add symbol on the top right of the screen
b)
Select “Set Up My Device To Wi Fi”
c)
Input the name and password for the Wi Fi network
you are connected to, this is the one that the device
will connect to.
d)
You will then be directed to the search screen
N.B:
On the search screen a QR code can be displayed if you
tap the icon in the top right corner. Displaying this QR Code
to the Doorbell’s Camera can speed up the
Configuration process.
