Fitting the SCS311 / SCS317 Programmable Room
Thermostat
First install the 2 x AA batteries provided making sure that they
are fitted correctly as indicated by the markings in the battery
compartment on the front of the SCS311 and SCS317.
Once the SCS311 or SCS317 is successfully included / paired
the SCS311 or SCS317 can be installed in its correct location.
Avoid installing the SCS311 / SCS317 against or behind any
large metal surfaces which could interfere with the radio signals.
The SCS311 / SCS317 should be mounted on an internal wall
approximately 1.5 metres from floor level using the wall plate
provided and should be in a position away from draughts, direct
heat and sunlight. Ensure that there will be enough space to
allow easy access to the two retaining screws located at the
base of the wall plate.
1.5m
3
