ProLogic L66
Operation Instructions
39
Step 5: Using the numbers on the EntryPad specify the desired Host ID number from 1-9, and
press OK.
This safe lock system will now communicate with the PC with the same Host ID.
14.3 Wireless Connection
When selected the menu item “Wireless Connection” pushes audit trail data from the safe lock system
to the connected Host device.
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The “Select Menu” message will be displayed as follows:
Step 4: Scroll UP to the menu selection “Wireless Connection” and Press OK.
The Audit events will transmit wirelessly to the connected Host Device and associated software.
You will see a progress report on the LCD as the data is transferred.
15.0 Data Management
The ProLogic L66 can receive and send data using its built-in wireless transmitter/receiver. As a security
measure, all data that is transmitted or received by the EntryPad is encrypted. This includes data sent
across the 4 pin lock cable from the EntryPad to the lock, such as User codes.
15.1 Restore Data
The ProLogic L66 can be programmed wirelessly using SecuRam’s Parameters Management software.
The Restore Data function is used to receive programming parameters at the EntryPad.
Step1: Press the Menu/OK button.
