ProLogic L22
Operation Instructions
28
Step 5: The system will prompt you to enter the Manufacturing Setup Code.
Enter 975246 (PW L 6/Users 10 or PW L 6/Users 30) or 97524600 (PW L 8/Users 30) and press
OK.
Step 6: Press the
and
to specify the number of lock to be controlled; and press OK.
11.4 Numbering and Adding Multiple Locks
In this programming step, we will add and number additional locks using the CB11-1T4 Junction Box.
Only one lock can be programmed at a time and each one will need to be mechanically reset.
Step 1: Connect your ProLogic L22 EntryPad to the CB11-1T4 Junction box in port J0.
Step 2: Perform a mechanical reset on your first lock and connect it to any open port on the
Junction box.
Step 3: Enter a valid code and it will ask you “Select Lock”. Select 1 – 4 to name the lock. If you
press 1, this lock will be named Lock 1. If you press 2, the lock will be named Lock 2, etc.
Step 4: Repeat the process to add more locks. Remember to have only one lock connected at
a time.
Step 5: Once you have finished naming your locks, connect all of them to the CB11-1T4.
11.5 Authorize Locks
In this programming step, you can specify or “authorize” which Users will have to each of the locks.
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
